|
Post by tuesdaymine on Jul 28, 2010 16:21:03 GMT
Hi Everyone Have a Canon Pixma MP220 Today the paper has started jamming up the machine, changed ink cartridges, ran full maintenance clean, looked for any small bits of paper that might cause the problem. Paid £39-99 nearly 2 yrs and have not had any problems till today. Your thoughts on this would be appreciated. Tuesday
|
|
|
Post by ken on Jul 28, 2010 16:38:28 GMT
You haven't moved it have you Tuesday??? If its not sitting level it can cause some printers to jam up. It causes the paper to go a little bit to one side and it wont run through straight.
|
|
|
Post by tuesdaymine on Jul 28, 2010 20:09:20 GMT
Thanks Ken
I moved it after the problem started, only to have good look inside.
Its level and allways worked well.
Now thinking best forget the £35 i spent this morning on cartages and buy a new printer.
Tuesday x
|
|
|
Post by Lynnrose on Jul 28, 2010 20:45:23 GMT
|
|
|
Post by tuesdaymine on Jul 28, 2010 21:24:46 GMT
Thanks Lynnrose Did not turn it over, just looked inside with a torch. But will try this in the morning before going to Tesco's for a replacement. Tuesday
|
|
|
Post by tuesdaymine on Jul 29, 2010 13:59:58 GMT
Hi Everyone
I filled the tray with a lot more paper than i have before, and printer's running OK at the moment, not sure why that is.
As soon as i start printing the paper going through the rollers still drops over to the one side, but printing fine.
Pleased i never went to Tesco's, but they do have some good offer on Printers.
|
|
|
Post by Lynnrose on Jul 29, 2010 16:24:29 GMT
That's good, you can always buy a new one if it gets any worse x
|
|