Post by elvisuk on Jun 2, 2010 19:33:34 GMT
H! Mikkh,
I am now using Mint 9 and i am very pleased with it it put AcetoneISO with out any problems the same with my scanner but i still cannot get LightScribe to work i spent a few hours on it and tried to do this see below and i had a good read from the link you put up but to no avail, think i will give it a miss for a bit
(
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The following instructions worked for me to install lightscribe under 64-bit ubuntu. Open a terminal, then copy and paste each command as required.
The version numbers will need to be changed to match the actual download files. The first two commands will install the LightScribe software. The remaining commands will resolve issues with referencing a required library.
sudo dpkg -i --force architecture lightscribe-1.12.37.1-linux-2.6-intel.deb
sudo dpkg -i --force architecture lightscribeApplications-1.10.19.1-linux-2.6-intel.deb
sudo ln -s /usr/lib/liblightscribe.so.1 /usr/lib32/
sudo ln -s /usr/lib/liblightscribe.so /usr/lib32/
sudo ldconfig
The following instruction will provide a two-item menu that includes an option to print darker labels:
sudo /usr/lib/lightscribe/elcu.sh
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I had to add the 32 bit libraries to get it to work for me:
sudo apt-get install ia32-libs
sudo dpkg -i --force architecture lightscribe-1.18.15.1-linux-2.6-intel.deb
sudo dpkg -i --force architecture lightscribeApplications-1.18.15.1-linux-2.6-intel.deb
intel.deb
sudo ln -s /usr/lib/liblightscribe.so.1 /usr/lib32/
sudo ln -s /usr/lib/liblightscribe.so /usr/lib32/
sudo ldconfig
now I'm labeling with two drives at the same time!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
http://www.lightscribe.com/discussionBoards/index.aspx?g=posts&t=2724
I am now using Mint 9 and i am very pleased with it it put AcetoneISO with out any problems the same with my scanner but i still cannot get LightScribe to work i spent a few hours on it and tried to do this see below and i had a good read from the link you put up but to no avail, think i will give it a miss for a bit
(>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The following instructions worked for me to install lightscribe under 64-bit ubuntu. Open a terminal, then copy and paste each command as required.
The version numbers will need to be changed to match the actual download files. The first two commands will install the LightScribe software. The remaining commands will resolve issues with referencing a required library.
sudo dpkg -i --force architecture lightscribe-1.12.37.1-linux-2.6-intel.deb
sudo dpkg -i --force architecture lightscribeApplications-1.10.19.1-linux-2.6-intel.deb
sudo ln -s /usr/lib/liblightscribe.so.1 /usr/lib32/
sudo ln -s /usr/lib/liblightscribe.so /usr/lib32/
sudo ldconfig
The following instruction will provide a two-item menu that includes an option to print darker labels:
sudo /usr/lib/lightscribe/elcu.sh
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
I had to add the 32 bit libraries to get it to work for me:
sudo apt-get install ia32-libs
sudo dpkg -i --force architecture lightscribe-1.18.15.1-linux-2.6-intel.deb
sudo dpkg -i --force architecture lightscribeApplications-1.18.15.1-linux-2.6-intel.deb
intel.deb
sudo ln -s /usr/lib/liblightscribe.so.1 /usr/lib32/
sudo ln -s /usr/lib/liblightscribe.so /usr/lib32/
sudo ldconfig
now I'm labeling with two drives at the same time!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
http://www.lightscribe.com/discussionBoards/index.aspx?g=posts&t=2724
